SMTS Marine Solutions LLC supplies marine equipment and tank gauging solutions for the shipping, offshore, oil and gas, and petrochemical industries across the United Arab Emirates and the wider Middle East.
The Honeywell Tanksystem HERMetic UTImeter Gtex N Series is a portable electronic tank gauging instrument designed for closed and gas-tight measurement of liquid levels in marine cargo tanks. It enables operators to carry out ullage measurement, temperature verification and oil-water interface detection through a suitable vapour control valve without opening the tank directly to the atmosphere.
The N Series product catalogue also describes different storage tube arrangements, including SS1-Q1, SS1-Q2 and SS2-Q2 versions for applicable configurations.
Designed for marine cargo measurement and tank inventory applications, the HERMetic UTImeter Gtex N Series supports safer and more efficient gauging operations involving crude oil, petroleum products, light chemicals and compatible chemical cargoes, depending on the selected model.
SMTS Marine Solutions LLC welcomes enquiries for the HERMetic UTImeter Gtex N Series in UAE, including model selection, tape lengths, chemical versions, connection arrangements and compatible replacement accessories.
Honeywell HERMetic UTImeter Gtex N Series Supplier in UAE
Gas-Tight Closed Gauging for Marine Cargo Tanks
Closed gauging is important when vessels operate with cargo tanks designed to limit the release of vapours into the surrounding atmosphere.
The HERMetic UTImeter Gtex N Series is designed to connect to a compatible vapour control valve or approved connection arrangement. This enables the operator to carry out tank measurements while maintaining the intended closed system.
The gas-tight arrangement helps to:
Minimise direct contact with cargo vapours.
Reduce unnecessary vapour release during tank measurement.
Support cargo measurement procedures on vessels with vapour control systems.
Assist with cargo inventory and quantity verification.
Support temperature measurement and free-water detection.
Maintain the intended closed gauging arrangement when used with compatible valves and connections.
Correct valve compatibility, connection size, gasket material and instrument version must be confirmed before ordering.
Three Measurements in One Instrument
The HERMetic UTImeter Gtex N Series combines three measurement functions in one portable electronic instrument.
1. Ullage Measurement
Ullage measurement determines the distance from the tank reference point to the liquid surface. It is used in cargo measurement, tank inventory control and cargo quantity calculations.
The electronic sensor detects the liquid surface and provides an audible and visible indication to the operator.
2. Temperature Measurement
The instrument provides continuous temperature readings through its RTD temperature sensing element.
Temperature information is important for cargo inspection, quantity calculations and monitoring petroleum products and compatible chemical cargoes.
3. Oil-Water Interface Detection
The UTImeter can detect the interface between oil and free water, supporting free-water checks and cargo inspection procedures.
The three measurement functions help reduce the need to use separate instruments for each measurement task.
HERMetic UTImeter Gtex N Series – Available Versions
The Gtex N Series is offered in different versions to suit the cargo type, chemical compatibility, connection arrangement and tank operating pressure.
| Model / Version | Application | Tape Length | Gas Group | Maximum Tank Pressure |
|---|---|---|---|---|
| TS NGUTI – Standard Version | Crude oil, petroleum products and light chemicals | 15 m, 25 m, 35 m | IIB | 0.3 bar |
| TS NGUTI – Chemical Version | Chemical cargo applications | 15 m, 25 m | IIC | 0.3 bar |
| TS NHUTI – High Pressure Version | Crude oil, petroleum products and light chemicals | 25 m | IIB | 0.7 bar |
The above model selection follows the manufacturer’s Gtex N Series selection information. Confirm the exact product code, tape assembly, sensor configuration, connection and approval details against the required order specification.
Standard Version – HERMetic UTImeter Gtex N Series IIB
The standard version is designed for closed and gas-tight gauging of crude oil, petroleum products and light chemicals within its specified application limits.
Available tape lengths include:
15 metres
25 metres
35 metres
The standard version is listed with IIB gas-group classification and a maximum tank pressure of 0.3 bar.
It is suitable for compatible marine cargo tank measurement applications where the standard version meets the vessel’s connection and operating requirements.
Chemical Version – HERMetic UTImeter Gtex N Series IIC
The chemical version is intended for compatible chemical cargo applications where the specified chemical-resistant materials and IIC gas-group classification are required.
Available tape lengths include:
15 metres
25 metres
The chemical version is listed with IIC gas-group classification and a maximum tank pressure of 0.3 bar.
Chemical compatibility must be checked against the actual cargo and the manufacturer’s approved materials. Confirm the required version and gasket arrangement before ordering.
High Pressure Version – HERMetic UTImeter Gtex N Series
The high-pressure version is designed for applications requiring a higher maximum tank pressure than the standard version.
Manufacturer model-selection information lists:
Model family: TS NHUTI
Tape length: 25 metres
Gas group: IIB
Maximum tank pressure: 0.7 bar
The high-pressure version should be selected only after confirming the vessel’s tank operating conditions, connection arrangement and manufacturer requirements.
Tape Length Options and Storage Tube Compatibility
The correct tape length is an important part of selecting a HERMetic UTImeter Gtex N Series instrument.
The manufacturer’s N Series selection information lists different tape lengths according to the selected version. Standard and chemical versions have different available lengths, while the high-pressure version is listed with a 25-metre tape.
The N Series product catalogue also describes different storage tube arrangements, including SS1-Q1, SS1-Q2 and SS2-Q2 versions for applicable configurations.
Before ordering, confirm:
Required tape length.
Correct model and gas group.
Storage tube version.
Sensor and tape assembly.
Connection size and adapter.
Required chemical compatibility.
Existing onboard valve arrangement.
Mechanical Tape Cleaning Device
The HERMetic UTImeter Gtex N Series is equipped with a mechanical tape cleaning device.
The tape cleaning mechanism is designed to help clean the tape during retraction, reducing the amount of cargo residue carried back into the storage tube.
The cleaning device is operated using a dedicated knob on the front of the instrument. It is designed to support cleaner tape retraction during normal operation.
Regular inspection and maintenance should be carried out in accordance with the manufacturer’s instructions.
Vapour Control Valve and Connection Compatibility
The HERMetic UTImeter Gtex N Series must be matched with the correct vapour control valve and connection arrangement.
The manufacturer lists connection sizes including:
1-inch connection.
2-inch connection.
Special storage tube arrangements for non-HERMetic valves, where applicable.
Interchangeable adapters can be used for compatible connection arrangements. The exact adapter and storage tube should be confirmed before supply.
Marine Applications of HERMetic UTImeter Gtex N Series
The HERMetic UTImeter Gtex N Series is designed for portable tank gauging and cargo measurement applications involving compatible petroleum and chemical products.
Typical applications include:
Crude oil cargo tank gauging.
Petroleum product measurement.
Chemical cargo tank gauging with the appropriate chemical version.
Ullage measurement onboard tankers.
Cargo temperature verification.
Free-water interface detection.
Cargo inventory control.
Custody transfer measurement support.
Verification of automatic tank gauging systems.
Shore tank measurement applications.
The selected instrument must be suitable for the cargo, tank pressure, hazardous-area classification and connection arrangement.
Replacement Parts and Accessories for HERMetic UTImeter Gtex N Series
SMTS Marine Solutions LLC welcomes enquiries for compatible HERMetic UTImeter replacement parts and accessories.
Depending on the model and requirement, enquiries may include:
Replacement tape assemblies.
Replacement sensor assemblies.
Storage tubes.
Tape cleaning components.
Battery holder assemblies.
Electronic box assemblies.
Connection adapters.
Quick-connect fittings.
Gaskets and sealing components.
Other compatible service and maintenance parts.
For replacement-part enquiries, provide the existing instrument model, tape length, part number and a photograph of the installed assembly wherever possible.
tur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Cargo Measurement and Inventory Control
Accurate tank gauging is an important part of marine cargo operations. Ullage, temperature and free-water measurements provide information used during cargo inspection and inventory control.
The HERMetic UTImeter Gtex N Series combines these measurement functions in a portable instrument, helping operators carry out the required checks through a compatible closed gauging arrangement.
The instrument can support cargo measurement procedures and verification activities. Final cargo quantity calculations must follow the applicable measurement standards, vessel procedures and relevant cargo documentation.
Approvals, Standards and Hazardous-Area Suitability
The manufacturer lists standards and approvals for the HERMetic UTImeter Gtex N Series, including applicable IMO, SOLAS, MARPOL, API and ISO requirements.
The manufacturer’s product information also lists hazardous-area approvals for the applicable product versions.
Approval details can differ according to the model, gas group and version. Always verify the exact product certificate, nameplate, hazardous-area marking and documentation required by the vessel or end user before use.
Why Contact SMTS Marine Solutions LLC?
SMTS Marine Solutions LLC, based in Al Garhoud, Dubai, supports marine equipment supply enquiries for vessel operators, ship management companies, shipyards, marine service providers and industrial customers.
Contact our team for:
HERMetic UTImeter Gtex N Series enquiries.
Standard, chemical and high-pressure model selection.
15 m, 25 m and 35 m tape-length enquiries, as applicable.
Valve and connection compatibility checks.
Replacement tape, sensor and accessory enquiries.
Technical specification and documentation enquiries.
Supply and delivery coordination.
Please share the required tape length, model version, gas group, onboard valve photograph and quantity to help us review your requirement.
HERMetic UTImeter Gtex N Series Supplier Across UAE Ports
SMTS Marine Solutions LLC welcomes enquiries from customers operating across the UAE’s maritime and industrial sectors.
UAE Ports and Locations:
Dubai | Jebel Ali | Port Rashid | Mina Al Hamriya | Abu Dhabi | Zayed Port | Khalifa Port | Musaffah Port | Fujairah | Fujairah Port | Sharjah | Port Khalid | Hamriyah Port | Khor Fakkan | Ras Al-Khaimah | Saqr Port | Ajman | Umm Al Quwain & More
Supplying Across Middle East Ports
SMTS Marine Solutions LLC also welcomes marine equipment enquiries from customers across the wider Middle East.
Middle East Ports and Locations:
Dubai | Jebel Ali | Fujairah | Abu Dhabi | Sohar | Muscat | Salalah | Dammam | Jubail | Jeddah | Yanbu | Doha | Ras Laffan | Mesaieed | Kuwait City | Shuwaikh | Shuaiba | Bahrain | Mina Salman & More
Looking for a Honeywell HERMetic UTImeter Gtex N Series Supplier in UAE?
Contact SMTS Marine Solutions LLC for product enquiries, model selection, tape-length requirements, replacement parts and delivery arrangements.
To help us identify the correct instrument, please provide:
Required model or existing instrument model.
Tape length: 15 m, 25 m or 35 m, as applicable.
Standard, chemical or high-pressure version.
Required gas group: IIB or IIC.
Onboard valve photograph and connection size.
Quantity required.
Vessel name and delivery location, if applicable.